:: SLV Rostock ::

	First certifications from NAKS for the russian marked Three different certificates were assigned by the NAKS - certification centre at SLV M-V GmbH to European clients in 2006/2007. These are LINDE AG/ LINDE Engineering Devision, Tacherting (D), for "Welding Personnel" and "Welding Tecnology", SAFRA S.p.A, Travagliato (I), for "Welding Consumption", and BÖHLER Schweißtechnik Austria GmbH, Kapfenberg (A), for "Welding Consumption". These certificates are necessary for the russian marked, if materials, technologies or personnal has to work in so-called "imperiled" construction fields approved by the building authorities.

	Network Innovative Laser-Users for implementation of laser based production in small enterprises This is the title of a new research project of the SLV M-V GmbH which is sponsored by the European Social Fond up to the end of 2007. The aim of that project is to better the competitive position of small and middle sized enterprises by using laser technology. Partner are engineers and technican from SLV M-V GmbH and laser companies in the periphery. Also planned are training courses and special lectures.

	Demolition and new building of the "Schnettker" - bridge in connection with the B1 in Dortmund. SLV M-V GmbH runs the construction supervision for the steel construction and the corrosion protection for the above mentioned project up to 2008. Main contractor is the "Schachtbau Nordhausen GmbH". Ruthly 80 % of the steel construction will be carried out by the enterprise "Kurganstalmost" in the Siberian Kurgan, which was approved by SLV M-V GmbH.

	First 10 kW fibre laser machine is working at SLV M-V At July 29 and 30 in 2004 the Laser Technology and Tranfer Center in Rostock had commissioned the worldwide first Ytterbium- fibre laser with a power of 10 kW. The user of that laser source, SLV M-V, and the producer, IPG GmbH, had carried out a lot of measurements on this laser source in line with putting into service. With a wall plug efficiency of roughly 25 % and a beam parameter product of about 12 mm*mrad new standards in the laser technique were set. This technical parameters as well as the small overall size of the laser source (B=1,5m; H=1,5m; T=0,8m) and their easy electrical installation by a common standardized 63 A - connector are differences this source from all up to now for material treatment used solid-state or CO2-laser. Together with the laser source modern equipment for welding, cutting and surface treatment were set into service. With this the SLV M-V is able to deal with substantial tasks from industry as well as with technology development for German and foreign costumers at a very high level.

TOP